Archive

Posts Tagged ‘subwoofer’

Amplifiers Car Audio

September 17th, 2010 admin No comments

Top products related to “Amplifiers Car Audio” taken from trusted online stores:


BOSS AUDIO CX2500D 2500W x 1 @ 1 ohm  1800W x 1 @ 2 ohms Mono Car Amplifiers


BOSS AUDIO CX2500D 2500W x 1 @ 1 ohm 1800W x 1 @ 2 ohms Mono Car Amplifiers


$123.99


Series: CHAOS EXXTREME Amplifier Class: Class D RMS Power: 750W x 1 @ 4 ohms THD: 0.01% SNR: > 100 dB Bass Boost Control: 0-+18dB variable bass boost Dimensions: 11.88″ x 2.63″ x 12.69″ Features: Remote subwoofer level control Low level inputs Line outputs Variable gain control Input sensitivity selector Variable lowpass crossover Strapping capability: Strap two amps together for twice the power Variable subsonic filter Phase shift selector Power and protection LEDs

CROWN 280MA Stereo Commercial Audio Series Mixer-Amplifiers


CROWN 280MA Stereo Commercial Audio Series Mixer-Amplifiers


$719.81


The 280MA mixer/amplifier from Crown Audio offers terrific sound quality and reliability, ideal for paging and background music in offices, schools, hospitals, retail stores, and other similar venues. It is a 2 x 80W unit designed for two-zone systems, and offers 4 ohm, 70 volt, and 100 volt outputs to meet your needs. It also features protection circuitry to prevent against damage from overheating, overloads, or short circuits. Ideal for paging and background music in schools, offices, hospitals, etc. 70V/100V and 4 ohm output. 8-input, 2 x 80W unit. Easily connected to Crown Audio Commercial Audio Series mixers and amplifiers for expandability. Sends any input to any output. Independent bass and treble controls on each channel. Balanced phoenix-type inputs, touch-proof screw terminal outputs. Built-in 4 tone generator for bell, pre-announce chime, alert tone, and evacuate tone. Protection circuitry helps prevent against damage from over Power Output: Dual 80W power amplifiers for two-zone systems. Minimum guaranteed power into 4 ohms or 70V/100V output: 80W maximum power at 1 kHz with 0.5% THD. Frequency Response: Frequency Reponse (at 1 watt from 4-ohm tap, 70 Hz – 19 kHz): +/- 1 dB. Frequency Response (at line out, 20 Hz to 20 kHz): +/- 1 dB. Power Bandwidth (at 4-ohm tap, 2 dB below maxium 1 kHz power): 50 Hz to 20 kHz with THD: Less than 0.5% at rated power at 1 kHz. Multi Zone: Yes

New Acoustic Audio XS2402 2400 Watt 1/2-Channel Car Amplifier


New Acoustic Audio XS2402 2400 Watt 1/2-Channel Car Amplifier


$118.88


This Acoustic Audio XS2402, Xtreme Series 2 channel car amplifier, retails for $349.99 plus tax. Acoustic Audio Xtreme Series amps feature fine-tuned audio controls, extreme durability, and proprietary technologies that deliver stronger, more reliable performance than most other amplifiers on the market today. This high performance MOSFET amplifier delivers 600 watts RMS to 1200 watts peak power into each channel – more than enough to drive a pair of full-range speakers or components to their musical peaks. You can also bridge the amp to blast 2400 watts peak to a subwoofer(s) or with its Tri-mode capability, run subs and speakers simultaneously. Other features include: MOSFET power supply, power/protection LEDs, 0-12dB bass boost (FREE remote bass knob), selectable LP/FULL/HP crossovers, LP/HP filters, gain control, and RCA line and speaker line inputs. We are an authorized Acoustic Audio dealer. Complete with a full 1 year warranty and our exclusive 30 day money back guarantee.

New Acoustic Audio XS1602 1600 Watt 1/2-Channel Car Amplifier


New Acoustic Audio XS1602 1600 Watt 1/2-Channel Car Amplifier


$98.88


This Acoustic Audio XS1602, Xtreme Series 2 channel car amplifier, retails for $299.99 plus tax. Acoustic Audio Xtreme Series amps feature fine-tuned audio controls, extreme durability, and proprietary technologies that deliver stronger, more reliable performance than most other amplifiers on the market today. This high performance MOSFET amplifier delivers 400 watts RMS to 800 watts into each channel – more than enough to drive a pair of full-range speakers or components to their musical peaks. You can also bridge the amp to blast 1600 watts to a subwoofer(s) or with its Tri-mode capability, run subs and speakers simultaneously. Other features include: MOSFET power supply, power/protection LEDs, 0-12dB bass boost (FREE remote bass knob), selectable LP/FULL/HP crossovers, LP/HP filters, gain control, and RCA line and speaker line inputs. We are an authorized Acoustic Audio dealer. Complete with a full 1 year warranty and our exclusive 30 day money back guarantee.

Boss CAP4C - car audio capacitor. Each


Boss CAP4C – car audio capacitor. Each


$51.34


Manufacturer: Boss. Each. Product Type: Car audio capacitor Customers also search for: Discount BOSS CAP4C – car audio capacitor, Buy BOSS CAP4C – car audio capacitor, Wholesale BOSS CAP4C – car audio capacitor, 0791489108935, CAP4C Car Audio and Video

Top products related to “Amplifiers Car Audio” taken from Amazon.com:


Ashly SRA-4150 Amplifier Four Channel 80 Watt Ch at 8 Ohms 1RU Chassis Class D Output Circuitry


Ashly SRA-4150 Amplifier Four Channel 80 Watt Ch at 8 Ohms 1RU Chassis Class D Output Circuitry


$790.00


4x150W RMS @ 4 ohm 1RU, Convection Cooled…

MTV's Amp


MTV’s Amp


$13.98



HiFonics BXi 1606D Mono Block Amplifier


HiFonics BXi 1606D Mono Block Amplifier



RMS (Continuous) Power: 1600-Watt x 1 @ 1-Ohm
Highly Efficient Super D-Class Amplifier Circuitry With Oversized MOSFET Output
Fully Adjustable Accu-Cross Crossovers
18dB Variable Bass Equalization @ 45Hz
180 Variable Phase Control (15 to 35Hz)…


How to Install Car Amplifiers


How to Install Car Amplifiers


$48.99


Dr. Crankenstein’s zany yet helpful Car Audio Installation Staff will take you step-by-step through a car amplifier installation job. Doc, Julie, and Tina, the lovely assistant, will give you helpful hints and pro’s tricks to show you how to install your own killer amplifier system. Whether you’re looking to have a system that pounds the pavement, or you just enjoy accurate sound reproduction, thi…

Tripp Lite APS2012 2000W 12V DC to AC Inverter with Automatic Line-to-Battery 100/25-Amp Charger


Tripp Lite APS2012 2000W 12V DC to AC Inverter with Automatic Line-to-Battery 100/25-Amp Charger


$1,089.00


Tripp Lite APS2012 PWRINV APS 2012 2000W 12VDC HWIRE…

Pocketalker Pro with Wide Range Earphone


Pocketalker Pro with Wide Range Earphone


$137.97


Hear what you’ve been missing The Pocketalker Pro includes a sensitive microphone that can be placed close to the sound source to minimize background noise, a compact amplifier with volume control, and your choice of three earphone/headphone options to deliver full range, high quality sound. For hearing aid wearer, neckloop and silhouette telecoil couplers are available for use with telecoil-equip…

Pocketalker Pro with HED026 Rear-Wear Headphone by Williams Sound PKTPRO1-H26


Pocketalker Pro with HED026 Rear-Wear Headphone by Williams Sound PKTPRO1-H26


$126.95


This personal amplifier by Williams Sound is ideal for use in small group situations, car trips, noisy restaurants, or any place where there is distracting environmental noise. Small, lightweight and portable, the Pocketalker Pro operates up to 100 hours on AA alkaline batteries (included) or on AC power with purchase of optional charging kit. Adjustable volume control and a sensitive microphone d…

Elenco Am/Fm Radio Kit PC Board Audio Amplifier FM Detector 52 Page Manual Nine Lessons


Elenco Am/Fm Radio Kit PC Board Audio Amplifier FM Detector 52 Page Manual Nine Lessons


$49.59


Audio amplifier, AM detector, AM IF, AM amplifier, AM mixer and oscillator, FM detector, first FM IF, second FM IF, and FM RF stages….

Elenco 500-In-1 Electronic Project Lab Kit Built-In Breadboard LCD Indicator Transistors


Elenco 500-In-1 Electronic Project Lab Kit Built-In Breadboard LCD Indicator Transistors


$317.88


Learn the basics of electronics and put your knowledge to work creating 500 different electronic experiments, special lighting effects, radio transmitter and receivers, amazing electronic sound effects, cool games and more….

Elenco 300-In-1 Electronic Project Lab Kit Easy-To-Understand Illustrated Manual Included


Elenco 300-In-1 Electronic Project Lab Kit Easy-To-Understand Illustrated Manual Included


$137.99


Projects include a transistor radio, delayed timer, digital light dimmer, electronic candle, voice level meter, voltage controlled amplifier and many more….

5 Tips to Transform Your Ordinary Car Audio, Car Audio in exceptional

If you selected your dream car audio system, and are prepared to your basic Stereo to turn into a full-blown mega-sound system, you have to go in a position to install it correctly. Even the best, most expensive car audio equipment is not with sound up to par, if something was not installed correctly. The speaker will depend on the Car Audio Amplifier and the nature of the case. The amplifier is dependent on the current and the current is dependent on the alternator and the wiring. All this is connected and if one area was not properly installed, the rest can not succeed.

Speakers: The first thing you should do is to find out where you place the speakers. Car Speaker placement is crucial to the quality of the sound. In general, it is best to set the distance between the left and right speakers to leave as small as possible. Some have better luck placing the speakers on the floor, but with this Position is the risk of sound emerged from under your feet, some people can distract. Start at the installation, try the speakers in different places as trial and error process to find out what works for you before you go to the trouble to install it permanently. After the correct Location found for your speakers, you will some material like Dynamat or similar need to suppress the vibrations.

Cable: Next is cable installation. How you connect the speaker wires and their location crucial to achieve that great sound you are after. Some people choose to install giant amplifier, to the best sound, when in reality all you need is to get quality, properly installed cables.

Car Audio Amplifiers and Head Unit: You can choose to use the factory wires, or you can use the main unit a separate circuit with other wires. If your Car Radio on the quality existing factory audio, you should not really need an additional circuit. Again, use high quality cables and do not skimp on terminals and distribution blocks. During this time, you can also install filters. Get inline noise filter unwanted noise in your car audio setup by interference from your car on the electric Plant caused rid of them.

Next you need to build a speaker cabinet. There is no definitive rules on what type of housing works best with special car audio systems. You should just select the type of housing that maximize the level of sound you want. Feel free to experiment with different shapes and sizes until you find one that the sound quality produced by.

Install your car audio system is a very personal and rewarding experience. It is a great achievement to the finished product is complete and ready to rock, but do not discourage you if you tried a few, it will take, where as it should be obtained.

About the Author

At www.PyleAudio.com you can find state-of-the-art
car audio
and
car audio speaker
, including mobile video and more that will make your car go bling bling.

How To Hook Up Two Amplifiers, Car Audio

Diy Subwoofer Amplifier

September 5th, 2010 admin No comments

Top products related to “Diy Subwoofer Amplifier” taken from trusted online stores:


RUB1.2500D - Soundstream Monoblock 2500 Watt RMS Rubicon Series Subwoofer Amplifier


RUB1.2500D – Soundstream Monoblock 2500 Watt RMS Rubicon Series Subwoofer Amplifier


$404.79


RUB1.2500D – Soundstream Monoblock 2500 Watt RMS Rubicon Series Subwoofer Amplifier

InstallerNet Subwoofer e-InstallCard


InstallerNet Subwoofer e-InstallCard


$54.99


Type: Installation Title: Subwoofer e-InstallCard Description: Enjoy all the benefits of your new subwoofer by having a local, professional installer properly and safely install it for you Scope of Work: Labor to install an aftermarket self enclosed subwoofer in your vehicle. Mount a subwoofer and wire to an existing amplifier or mount a subwoofer to an existing enclosure after mounting a self enclosed subwoofer Disclaimers: Amplifier installation is not included

Pyle Audio PLTA8N - Car Subwoofer. Each


Pyle Audio PLTA8N – Car Subwoofer. Each


$89.64


Manufacturer: Pyle Audio, Inc. Each. This Pyle blue wave subwoofer pushes 250 watts of booming bass! The 8″ high-power amplified subwoofer tube has a built in high output amplifier. It’s equipped with a silver electroplated polypropylene cone and speciall

Boss CHAOS EXXTREME CX1100M - Amplifier. Each


Boss CHAOS EXXTREME CX1100M – Amplifier. Each


$86.94


Manufacturer: Boss. Each. This monoblock MOSFET power amplifier is designed with remote subwoofer level control. Product Type: Amplifier Dimensions (WxDxH): 11.9 in x 10.6 in x 2.6 in Sound Effects: Bass Boost Amplifier: 1-channel Max Output Power / Chan

BIC America Venturi V-80 - subwoofer. Each


BIC America Venturi V-80 – subwoofer. Each


$123.04


Manufacturer: BIC America. Each. Product Type: Subwoofer Dimensions (WxDxH): 11.3 in x 11.3 in x 11.3 in Localization: English Speaker Type: Active Nominal (RMS) Output Power: 100 Watt Response Bandwidth: 37 – 120 Hz Audio Amplifier: Integrated Connectiv

Top products related to “Diy Subwoofer Amplifier” taken from Amazon.com:


Lepai Tripath Class-T Hi-Fi Audio Mini Amplifier with Power Supply


Lepai Tripath Class-T Hi-Fi Audio Mini Amplifier with Power Supply


$16.45


This Parts Express Lepai Tripath-based mini audio amplifier is ideal for home audio applications. Its small size and clean 20 watt output makes it perfect for most any auto or home audio project or DIY application where space is limited. Power supply included when purchased from Parts Express….

Pyramid PB717X 1,000-Watt 2-Channel Bridgeable Amplifier


Pyramid PB717X 1,000-Watt 2-Channel Bridgeable Amplifier


$135.99


Pyramid prides itself on solid car audio without the huge price tag. The PB717X is no exception, featuring two MOSFET-powered channels of 50 watts RMS (75 watts at 2 ohms), bridgeable for subwoofers, and selectable high- and low-pass crossover modes for different applications. Solid car audio without the huge price tag. Click to enlarge. View output diagram. View input diagram. Bri…

Infinity Reference 6032cf 6.5-Inch 180-Watt High-Performance Two-Way Speakers (Pair)


Infinity Reference 6032cf 6.5-Inch 180-Watt High-Performance Two-Way Speakers (Pair)


$45.89


With peak power handling of 180 watts and 93dB sensitivity, the Infinity REF6032CF Car Loudspeaker has everything you could ask for in a multielemental component speaker….

Kenwood KDC-MP345U In-Dash CD/MP3/WMA/iPod Receiver with USB/Aux Input


Kenwood KDC-MP345U In-Dash CD/MP3/WMA/iPod Receiver with USB/Aux Input


$129.99


Kenwood’s KDC-MP345U is a great replacement for that factory CD receiver, giving you both a USB port for simple connection of your iPod/iPhone or a thumb drive, an auxiliary input for other audio devices, playback of MP3/WMA files (via burnt CDs or from the USB port), and room to grow your system with dual preamp outputs. A solid replacement for your factory receiver. Click to en…

Blaupunkt iPod Aux. Input Cable


Blaupunkt iPod Aux. Input Cable


$12.99


Connects all iPod’s with docking connection to any Blaupunkt radio with CD changer controller, or Auxiliary inputs, allowing you to listen to all of your music through the Blaupunkt radio – The iPod connection cable charges the iPod while in use – Features a 50″ cable – Cable does not provide for control of the iPod through the receiver – All iPod functions are still controlled through the iPod it…

The Audiophile's Project Sourcebook: 80 High-Performance Audio Electronics Projects


The Audiophile’s Project Sourcebook: 80 High-Performance Audio Electronics Projects


$16.43


Build audio projects that produce great sound for far less than they cost in the store, with audio hobbyists’ favorite writer Randy Slone. In “The Audiophile’s Project Sourcebook”, Slone gives you – clear, illustrated schematics and instructions for high-quality, high-power electronic audio components that you can build at home; carefully constructed designs for virtually all standard high-end aud…

Diy Surround Sound

The debate whether to install your own surround system is falling on deaf ears, and you have decided to tackle this delicate task itself. Good for you. The thing is you are not really too sure about where to actually begin this delicate procedure. At this point I am assuming that either a home theater system or surround sound system purchased at home and prepare for the actual installation to begin. A good start is by reading the instructions and manual, who were most likely either the kit you bought or any of the individual components.

remember the thing with a surround-sound systems is that nothing without the speakers and they will work only for the work of its intended purpose if they are correctly positioned. However, you must make sure that the other components present are before starting work with the speakers. I recommend, especially if these are your first system you are using a simple AV receiver if you already have a tuner amplifier, bought and all the other great things there is no problem, just a little more involved than ever to go as processes. The installation of each of these devices is often as simple like finding a place for everything and plugging it right into the slot. The good news is that most systems have the "slots" only for this End labeled.

Once the receiver, you should begin the speakers connected. If you went with the basic 5.1-channel surround sound system, should You have six speakers and subwoofer. This is to start a good system, and (when you purchased your AV receiver with caution) zone for the growth and expansion to leave in the future. I begin with instructions for the placement of the six speakers to extend for a 5.1-channel system and include these instructions to the others later.

With a basic 5.1-channel surround sound system you have five speakers and a subwoofer. The placement of the speakers is important when it comes to the placement of ambient sounds that find in movies in the correct position in relation to the action itself is on the screen. Three of the five speakers are in the front. A spokesman in the middle and one on the left and right front speakers, the remaining two are behind you to the left and right (one left behind, a rear right). While this is not overly complicated concept you'd be amazed at the number of people that their surround sound systems are set up properly.

With the 6.1-channel system Move the rear left and right speakers to the side and put a speaker on the back and in the middle. If you upgrade from a 6.1 to a 7.1-channel surround Sound system, you move the speakers, which is in the back either from left to right and install the additional speaker on the opposite side and rear.

If you are making the investment in a home theater or surround sound system Please take the time to ensure that pieces and parts properly located and installed in order to get your money worth from the process. Now it's time to sit back and enjoy your new sound system.

Flat Panel HDTV

About the Author

Webmaster of http://www.flat-panel-hdtv.us/

10″ diy subwoofer with diy lm3886 amp

Subwoofer Plate Amplifier

August 23rd, 2010 admin No comments

Top products related to “Subwoofer Plate Amplifier” taken from trusted online stores:


RUB1.2500D - Soundstream Monoblock 2500 Watt RMS Rubicon Series Subwoofer Amplifier


RUB1.2500D – Soundstream Monoblock 2500 Watt RMS Rubicon Series Subwoofer Amplifier


$404.79


RUB1.2500D – Soundstream Monoblock 2500 Watt RMS Rubicon Series Subwoofer Amplifier

InstallerNet Subwoofer e-InstallCard


InstallerNet Subwoofer e-InstallCard


$54.99


Type: Installation Title: Subwoofer e-InstallCard Description: Enjoy all the benefits of your new subwoofer by having a local, professional installer properly and safely install it for you Scope of Work: Labor to install an aftermarket self enclosed subwoofer in your vehicle. Mount a subwoofer and wire to an existing amplifier or mount a subwoofer to an existing enclosure after mounting a self enclosed subwoofer Disclaimers: Amplifier installation is not included

Pyle Audio PLTA8N - Car Subwoofer. Each


Pyle Audio PLTA8N – Car Subwoofer. Each


$89.64


Manufacturer: Pyle Audio, Inc. Each. This Pyle blue wave subwoofer pushes 250 watts of booming bass! The 8″ high-power amplified subwoofer tube has a built in high output amplifier. It’s equipped with a silver electroplated polypropylene cone and speciall

Boss CHAOS EXXTREME CX1100M - Amplifier. Each


Boss CHAOS EXXTREME CX1100M – Amplifier. Each


$86.94


Manufacturer: Boss. Each. This monoblock MOSFET power amplifier is designed with remote subwoofer level control. Product Type: Amplifier Dimensions (WxDxH): 11.9 in x 10.6 in x 2.6 in Sound Effects: Bass Boost Amplifier: 1-channel Max Output Power / Chan

BIC America Venturi V-80 - subwoofer. Each


BIC America Venturi V-80 – subwoofer. Each


$123.04


Manufacturer: BIC America. Each. Product Type: Subwoofer Dimensions (WxDxH): 11.3 in x 11.3 in x 11.3 in Localization: English Speaker Type: Active Nominal (RMS) Output Power: 100 Watt Response Bandwidth: 37 – 120 Hz Audio Amplifier: Integrated Connectiv

Top products related to “Subwoofer Plate Amplifier” taken from Amazon.com:


Pioneer TS-W2502D2 10 In. Champion Series PRO Subwoofer with 3000 Watts


Pioneer TS-W2502D2 10 In. Champion Series PRO Subwoofer with 3000 Watts


$230.00


~Pioneer’s TS-W2502D2 subwoofers are designed to produce powerful bass. Just take a look at the super-heavy-duty construction, designed to handle up to 3,000 watts max. Double-stacked magnets deliver higher power, and a step-up radial surround offers superior control and long excursions. Pioneer used a constructed cast-aluminum basket for this sub–add in a patented IMPP cone and you’ve got a mons…

Pioneer TS-W2502D4 10 In. Champion Series PRO Subwoofer with 3000 Watts


Pioneer TS-W2502D4 10 In. Champion Series PRO Subwoofer with 3000 Watts


$106.50


~Pioneer’s TS-W2502D4 subwoofers are designed to produce powerful bass. Just take a look at the super-heavy-duty construction, designed to handle up to 3,000 watts max. Double-stacked magnets deliver higher power, and a step-up radial surround offers superior control and long excursions. Pioneer used a constructed cast-aluminum basket for this sub–add in a patented IMPP cone and you’ve got a mons…

Bazooka BT1224DVC BT Series 12-Inch 4-Ohm Dual Passive Tube


Bazooka BT1224DVC BT Series 12-Inch 4-Ohm Dual Passive Tube


$249.95


For those who just want the biggest tube around, this new dual-voice-coil, 12-inch Bass Tubes subwoofer is in a class by itself. BT1224DVCBT Series 12″ 4 ohm Dual Voice Coil Passive Tube Power Handling: 600 watts (Max) Impedance: Dual 4 Ohm Sensitivity: 106 dB Frequency Response: 30HZ-250HZ Recommended Power: 75-300 watts/channel Voice Coil Size: 2″ hi power/hi temp M…

Pioneer DEH-1300MP CD Receiver with MP3/WMA Playback and Remote Control


Pioneer DEH-1300MP CD Receiver with MP3/WMA Playback and Remote Control


$79.00


The DEH-1300MP combines Pioneer’s legendary in-car audio technologies with the simplicity of modern design to provide a boost to your vehicle’s existing sound system. Built for those seeking exceptional performance at an unprecedented value, the DEH-1300MP provides access to all your favorite music through its multi-format CD player, universal connectivity to portable media players and enhanced AM…

Dual XHD7714 In-Dash CD/MP3 Player with Remote, Built-in Bluetooth, HD Radio, iPod Cable, and 3.5mm Aux Input


Dual XHD7714 In-Dash CD/MP3 Player with Remote, Built-in Bluetooth, HD Radio, iPod Cable, and 3.5mm Aux Input


$87.90


Dual DM-S651 6.5″ Dual Cone Marine Speaker…

Polk Audio DB6501 6.5-Inch 2-Way Component System (Pair, Silver)


Polk Audio DB6501 6.5-Inch 2-Way Component System (Pair, Silver)


$99.00


Polk’s new 2007 db Series is better than ever with superior looks and even better sound–at prices that make high performance affordable to everyone. The db6501 is a 6.5-inch two-way component system that works well in OEM factory systems, as well as with high-powered aftermarket head units and component power amps. High performance that’s affordable to everyone. Click to enlarg…

Creative Labs 5700 Inspire 5.1 Digital Computer Speakers (6-Speaker, Black)


Creative Labs 5700 Inspire 5.1 Digital Computer Speakers (6-Speaker, Black)


$299.99



Panavise 670 A Satellite Radio Adapter Plate Fiberglass T Button Mounting Systems


Panavise 670 A Satellite Radio Adapter Plate Fiberglass T Button Mounting Systems


$19.75



Sony CDXGT340 MP3/WMA Player CD Receiver (Black)


Sony CDXGT340 MP3/WMA Player CD Receiver (Black)


$55.25


For music enthusiasts who want access to a variety of music sources in the car, the Xplod CDX-GT340 CD receiver is the mobile audio solution that lets you choose how you listen to your song files. It features a convenient front auxiliary input for portable music players, and it’s also equipped to handle HD Radio and satellite radio. Its 52W x 4 High Power output (208 watts total power) and two pre…

Infinity 6829CF 300W (Peak) 6 x 8 / 5 x 7 -Inch 2-Way Speakers (Pair)


Infinity 6829CF 300W (Peak) 6 x 8 / 5 x 7 -Inch 2-Way Speakers (Pair)


$63.59


KAPPA682.9CF6″ x 8″ (5″ x 7″) two-way loudspeaker with Plus One woven glass-fiber woofer cone and edge-driven MMD dome tweeter.?  Plus One woofer cones – This patent pending technology deliver a cone with more surface area than competing models of the same size. The result is increased bass output and higher efficiency. ?  Edge-driven MMD dome tweeters – These are not commonly used W-dom…

DIY home subwoofer, How to wire for the display of the sub turned on a LED?

I have a 300W amplifier and subwoofer plate bash is waiting at my Polk psw1000 subwoofer (and only) would be my own project to create a small. Anyway, I come with a logo and everything and at the top of the logo I want to create I a blue LED (only one small light just moved) to show that the subwoofer is turned on. Now I have my amp today and recognized that there is a light on the Back of the amplifier. Is it possible to just tap into the wiring for the light and feed different light on the front of the woofer where I want it? If not, what are some suggestions?

It may be possible to do that, but you will also appear to cause an additional burden on the circle of light, like this could lead to both lights burning out before it's time to be with another idea to take out the light and move it to the front of the box ….

Dayton DVC 8″ Sub | Dayton 70W Plate Amp